5x10ft 1000w Fiber Laser Cuutter For Steel Sheet AKJ1530F1
Advantages of Fiber laser cutter:
1.High Efficiency–The rapid cutting speed is two times higher than normal laser cutting machine.
2.Environment friendly–Laser cutting will not creates any gases for the special cutting technology for steel sheet.
3.Lower Consumption–The power consumption is 20%-30% lower than ordinary laser cutting machine.
4.Maintenance-free–For the fiber laser cutter, the reflect lens are no needed. It will help to save a lot of time when optical path is adjusted. The laser generator with longer lifetime which no need maintained during usage
500w /750w/1000w Raycus laser generator,
Au3tech cutting head and controller with remote DSP panel
Taiwan TBI ballscrew transmission for Z axis
Helical Rack and pinion Transmission for X,Y axis .
Dual-driver for Y axis.
French Motovario Reducer
Taiwan HIWIN 25MM guide rails,
Taiwan Delta 750w servo motor and drivers,
Taiwan Airtac pneumatic element.
Water chiller CW6000
Including Computer and the Arm support for PC.
AccTek fiber laser systems are capable of processing various metal types and play an essential part in industrial and commercial activities. Widely used in sheet metal processing, electronics, electrical appliances, subway parts, auto parts, hardware machinery, precision components, metallurgical equipment, elevator, gifts and crafts, adornment, advertising and medical device.
|Model||1530 Fiber laser cutting machine|
|Laser Wave Length||1064nm|
|Maximum Idle Running Speed||1200mm/s|
|Minimum Line Width||± 0.02mm|
|Position Type||red dot|
|Working life of fiber module||More than 100000 hours|
|Fiber laser cutting head||AU3TECH|
|Driver system||TAIWAN Delta servo|
|Liner guider system||Taiwan Hiwin 25mm|
|Transmit system||Dual Rack & Pinion type|
|Warranty time||1.5 years|